Table of Contents
Advertisement
LED name
System Status
Ethernet
Speed
Ethernet Link
86
Managing SAN Switches
LED color
Hardware status
No light
System is off, boot is not complete,
or boot failed.
Steady green
System is on and power supplies
are functioning properly.
Steady
Boot failed and system is faulty.
Amber (for
more than 5
seconds)
Flashing
Attention is required. A number
amber or
of variables can cause this status
green
including a single power supply
failure, a fan failure, or one or
more environmental ranges has
exceeded.
No light
Port speed is 10 Mb/s.
Steady green
Port speed is 100 Mb/s.
No light
There is no Ethernet link.
Steady
There is an Ethernet link.
amber
Flashing
There is link activity (traffic).
amber or no
light
Recommended action
Verify that the system is on and
booting is complete.
No action required.
Perform the following steps:
1.
Connect a serial cable to the
system.
2.
Reboot the system.
3.
Check the failure indicated on
the system console.
4.
Contact HP Technical Support.
Check the management interface
and the error log for details on the
cause of the status. Contact HP
Technical Support, if necessary.
No action required.
No action required.
Verify that the Ethernet cable is
connected correctly.
No action required.
No action required.
Advertisement
Table of Contents
