Items Required - HP AA-RWF3A-TE Installation Manual

Table 18 4/32 SAN Switch Power Supply Status LEDs
LED color
No light
Steady green
Steady amber
for more than 5
seconds

Items required

Replacing a 4/32 SAN Switch power supply should take less than two minutes and
requires the following items:
• New power supply
• Phillips #1 screwdriver
Meaning
The power supply is not receiving
power or is off.
Power supply is operating
normally.
Power supply fault for one of the
following reasons:
Power cable is disconnected.
Power supply is off.
Power supply has failed.
Corrective action
Verify that the power supply is on and seated
and that the power cord is connected to a
functioning power source.
No action required.
Try the following:
Check the power cable connection.
Verify that the power supply is powered on.
Replace the power supply.
SAN Switch installation guide
93