CD-ROM drive jumper settings
CD-ROM and PC/CD-ROM drives use jumpers or tabs to set the drives as
primary (master) or secondary (slave). Refer to the drive connector labels or
the figures below for the drive settings.
CD-ROM
40X
48X
BIOS levels
An incorrect level of BIOS can cause false error and unnecessary FRU
replacement. Use the following information to determine the current level of
AUDIO
39
R G G L
40
See Jumper
Settings Below
Primary (Master)
: :
: :
IDE INTERFACE
DC INPUT
1
5V G G 12V
2
Secondary (Slave)
Chapter 3. Types 6058/6059/6269/6578/6579
:
:
:
:
129