A40/ A40P Processor Speed Settings; A40/A40P Diskette Write Access - IBM NetVista 6058 Hardware Maintenance Manual

Note: The A40/A40P CMOS clear/recovery jumper pins are numbered as
Jumper
CMOS Reset

A40/ A40P Processor Speed Settings

Processor speed for type 6568/6569/6648/6649 computers are fixed and are
determined by the processor. There are no settings required.

A40/A40P Diskette Write Access

Diskette Write Enable and Write Protect options are changed in the Setup
Configuration. See "Setup Utility program" on page 41.
68
Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649
follows:
v Pin 1 is the farthest from the battery.
v Pins 2 and 3 are below pin 1, as seen in the A40/A40P System Board
layout.
Setting
2-3
1-2 (D)
Description
CMOS Reset/Flash Recovery Mode
Normal Mode