Ibm Pc Enhanced Memory Diagnostics; Alert-On Lan Test; Asset Id Test; Test Results - IBM NetVista 6058 Hardware Maintenance Manual

IBM PC Enhanced Memory Diagnostics

The IBM PC Enhanced Memory Diagnostics provide the capability to identify
a particular memory module (SIMM or DIMM) which fails during testing. Use
the System Board Layout section to reference the memory sockets, or select F1
twice to load the Online Manual and select Chapter 11, "SIMM/DIMM/RIMM
Locator".
Follow the steps below to locate the IBM PC Enhanced Memory Diagnostics
test options.
1. Select the DIAGNOSTICS option on the toolbar and press Enter.
2. Highlight either the Memory Test-Full or Memory Test-Quick option and
press Enter.
3. Memory Test-Full
The full memory test will take about 80 seconds per MB of memory and
will detect marginal, intermittent, and solid (stuck) memory failures.
4. Memory Test-Quick
The quick memory test will take about 20 seconds per MB of memory and
will detect solid (stuck) memory failures only.
Notes:
1. Either level of memory testing can be performed on all memory or a single
SIMM or DIMM socket.
2. Only sockets containing a SIMM or DIMM can be selected for testing.
Unpopulated sockets are noted by ........ beside the test description.

Alert-On LAN test

The Alert On LAN test does the following:
v Determines if Alert On LAN is supported on the system.
v Checks the revision ID register.
v Verifies the EEPROM checksum.
v Validates that a software alert can be sent.

Asset ID test

The Asset ID test does the following:
v Determines if Asset ID is supported on the system.
v Verifies the EEPROM areas.
v Performs an antenna detection test.

Test results

IBM PC Enhanced Diagnostic test results will produce the following error
code format:
Function Code Failure Type DeviceID
Chapter 3. Types 6058/6059/6269/6578/6579
Date ChkDigits Text
115