IBM NetVista 6058 Hardware Maintenance Manual page 179

POST Error Code
20104
20105 to 20110
Image Adapter/A Memory Test failure indicated
by graphic of adapter
206XX
208XXVerify there are no duplicate SCSI ID
settings on the same bus.
210XXXXInternal bus, size
unknown210XXX1External bus, size unknown
Tape Drive amber LED remains on
Tape Drive green "in use" LED fails to come on
Tape automatically ejected from drive
SCSI ID on rotary switch does not match SCSI ID
set in configuration. Verify drive switches inside
cover are set to zero
Tape sticks or breaks in drive. Verify that the tapes
used meet ANSI standard X3B5
212XX
213XX
FRU/Action
1. Memory Module DRAM, VRAM
2. Printer/Scanner Option
3. Image Adapter/A
1. Printer/Scanner Option
2. Image Adapter/A
3. Memory Module DRAM, VRAM
1. Replace memory module (shown in graphic)
1. SCSI-2 Adapter
2. Any SCSI Device
3. System Board
1. Any SCSI Device
1. SCSI Hard Disk Drive
2. SCSI Adapter or System Board
3. SCSI Cable
4. SCSI ID Switch (on some models)
1. Tape Drive
2. SCSI Cable (internal)
3. SCSI Adapter or System Board
1. Tape Drive
2. SCSI Adapter or System Board
3. SCSI Cable (internal)
4. SCSI Cable (external)
1. Tape Cassette
Drive
1. Rotary Switch Circuit Board
2. Circuit Board Cable
3. Tape Drive
1. Tape Cassette
1. SCSI Printer
2. Printer Cable
1. SCSI Processor
Chapter 3. Types 6058/6059/6269/6578/6579
165