IBM NetVista 6058 Hardware Maintenance Manual page 173

POST Error Code
1780 (Disk Drive 0)1781 (Disk Drive 1)1782 (Disk
Drive 2)1783 (Disk Drive 3)
180X, 188XPCI configuration or resource error
1962Boot sequence error
209X
20XXNot listed above
21XX
2401, 2402If screen colors change
2401, 2402If screen colors are OK
2409
2410
2462Video memory configuration error
4611, 4630
FRU/Action
1. See "Power supply" on page 108
2. Hard Disk Drive
3. System Board
4. Hard Disk Cable
5. Power Supply
1. Run Setup and verify PCI/ISA configuration
settings.
2. If necessary, set ISA adapters to Not available to
allow PCI adapters to properly configure.
3. Remove any suspect ISA adapters.
4. Rerun diagnostics.
5. PCI Adapter
1. Possible hard disk drive problem; see "Hard
disk drive boot error" on page 123.
1. Diskette Drive
2. Diskette Cable
1. BSC Adapter
1. SCSI Device
2. 16-bit AT Fast SCSU adapter
3. Alternate BSC adapter
1. Display
1. System Board
2. Display
1. Display
1. System Board
2. Display
1. Check cable connections
2. Run Setup and verify video configuration
settings
3. Video Memory Modules
4. Video Adapter (if installed)
5. System Board
1. Multiport/2 Interface Board
2. Multiport/2 Adapter
Chapter 3. Types 6058/6059/6269/6578/6579
159