Your Pcs 100; Getting Started - Splicecom PCS 100 User Manual

Your PCS 100

At rest, your PCS 100 is on-hook. All the buttons are explained in further detail in the
appropriate section of this User Guide.

Getting Started

Hot Desking/Log In
In most implementations the PCS 100 will be your permanent desktop phone and as such it
will have been automatically allocated to you by your System Administrator – there will be
no need for you to Log In or Log Out. However, if you are a Hot Desk User, in other words a
User who has been given the ability to log in to any phone on the system because, for
example, you need to move around the building or you are rarely in the office and do not
need a permanent telephone, you can log in to a PCS 100 as follows. You will need to know
your extension number and Login Access Code please refer to your System Administrator for
these details.
Or
V2.2/0505/1
Enter your extension number, an Asterisk, your Login Access
Code and terminate with a Hash. eg 2040*1234# The system will
automatically log you in, your Favourites will be will be
presented as your default Display and you can make and receive
calls in the normal way.
If the PCS 100 is already Logged In (it may default to another
user, or be used as a general phone with limited capabilities),
press the Page Up button.
- 2 -
PCS 100 User Manual
PCS 100 User Manual