Splicecom PCS 100 User Manual page 19

Ringback a previous caller
Each incoming call received by your PCS 100 will be logged in your historical incoming
calls list. The number received with these calls can be dialled-back directly from this list.
 Steve Smith
 Call
Note:
If the call is made back to a Contact "known" by the system – that is one within the
•
Contacts, Users or Departments directories - a list of other telephone numbers
associated with this entry will be shown. The active number (the one being dialled) is
indicated by a < in front of it.
If the caller's number has been withheld or not received by the system this facility
•
will not be available. The further information page will indicate if the caller's
telephone number has been received.
Deleting a call list entry
There is no limit placed on the number of completed calls, whilst the last 10 missed calls are
also recorded with the oldest entry being deleted once this number has been exceeded.
However, you can also manually delete an entry if required.
 Steve Smith
 Delete
V2.2/0505/1
Press the Message Box button.
If required, use the Page Down button to display further entries.
Select the call to be dialled-back using the Context Sensitive Key
alongside the required entry. Further information about that call is
now shown.
Dial the caller back by pressing the Context Sensitive Key
alongside Call.
Press the Message Box button.
If required, use the Page Down button to display further entries.
Select the call to be deleted using the Context Sensitive Key
alongside the required entry.
Remove the Incoming Call entry by pressing the Context
Sensitive Key alongside Delete.
Press the Message Box button to return to your default Favourites
Display.
- 15 -
PCS 100 User Manual
PCS 100 User Manual