Configuring Snapshot Settings - HIKVISION DS-2DF7284-AW User Manual

User Manual of IR Network Speed Dome
date and click
(4) Click
interface.
6. Click

7.3 Configuring Snapshot Settings

Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. You can
upload the captured pictures to a FTP server.
Basic Settings
Steps:
1. Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2. Check the Enable Timing Snapshot checkbox to enable continuous snapshot.
Check the Enable Event-triggered Snapshot checkbox to check event-triggered
snapshot.
3. Select the quality of the snapshot.
4. Set the time interval between two snapshots.
5. Click
Uploading to FTP
Please make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.
 Upload continuous snapshots to FTP
Steps:
1) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
2) Check the Enable Timing Snapshot checkbox.
 Upload event-triggered snapshots to FTP
Steps:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
.
to save the settings and exit the Edit Record Schedule
to save the settings.
to save the settings.
86
checkbox in FTP
www.cctvireland.ie