Table of Contents
Advertisement
User Manual of IR Network Speed Dome
(3) Click
NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, enter the domain name obtained from the NO-IP
website.
(3) Enter the Port of NO-IP server.
(4) Enter the User Name and Password registered on the NO-IP website.
(5) Click
6.3.5 Configuring SNMP Settings
Purpose:
You can use SNMP to get speed dome status and parameters related information.
Before you start:
Before setting the SNMP, please use the SNMP software and manage to receive the
speed dome information via SNMP port. By setting the Trap Address, the speed dome
can send the alarm event and exception messages to the surveillance center.
Note:
The SNMP version you select should be the same as that of the SNMP
software.
Steps:
1. Enter the SNMP Settings interface:
Configuration > Advanced Configuration > Network > SNMP
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to save the settings.
Figure 6-14 HiDDNS Settings
to save the settings.
50
www.cctvireland.ie
Hide quick links:
Advertisement
Table of Contents
