Table of Contents
Advertisement
User Manual of Network Speed Dome
(3) Check the checkbox
day to the whole week. You can also check any of the checkboxes before the
date and click
(4) Click
interface.
6. Click
7.3 Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. You can
upload the captured pictures to a FTP server.
Basic Settings
Steps:
1. Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2. Check the Enable Timing Snapshot checkbox to enable continuous snapshot.
Check the Enable Event-triggered Snapshot checkbox to check event-triggered
snapshot.
3. Select the quality of the snapshot.
4. Set the time interval between two snapshots.
5. Click
Uploading to FTP
Please make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.
Upload continuous snapshots to FTP
Steps:
1) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
© Hikvision
Figure 7-9 Edit Record Schedule
and click
.
to save the settings and exit the Edit Record Schedule
to save the settings.
to save the settings.
79
to copy settings of this
checkbox in FTP
Advertisement
Table of Contents
