Table of Contents
Advertisement
User Manual of IR Network Speed Dome
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click
to finish the setting of the current preset.
4. You can click
Note:
You can configure up to 256 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
preset.
For convenient preset selection, refer to the following steps to navigate to the preset
you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Note:
The following presets are predefined with special commands. You can only call
them but not configure them. For instance, preset 99 is the "Start auto scan". If you
call the preset 99, the speed dome starts auto scan function.
Special
Preset
33
Auto flip
34
Back to initial position
35
Call patrol 1
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 4-5 Setting a Preset
to delete the preset.
Figure 4-6 Calling a Preset
Table 4-3 Special Presets
Function
Special
Function
Preset
93
Set limit stops manually
94
Remote reboot
95
Call OSD menu
26
to call the
www.cctvireland.ie
Hide quick links:
Advertisement
Table of Contents
