User Manual of IR Network Speed Dome
authentication is needed. If the authentication fails, the devices don't connect to the
network.
The protected LAN with 802.1X standard is shown as follows:
Network Dome
PC
Before connecting the Network Camera to the protected LAN, please apply a
digital certificate from a Certificate Authority.
The network camera requests access to the protected LAN via the
authenticator (a switch).
The switch forwards the identity and password to the authentication
server(RADIUS server).
The switch forwar ds the certificate of authentication server to the network
camera.
If all the information is validated, the switch allows the network access to
the protected network.
Steps:
1. Connect the network camera to your PC directly with a network cable.
2. Enter the 802.1X Settings interface:
Configuration > Advanced Configuration > Network > 802.1X
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Authenticator
Network Switch
Net
PC
Figure 6-16 Protected LAN
52
Authentication
Server
RADIUS
Server
www.cctvireland.ie