Configuring Video And Audio Settings; Configuring Video Settings - HIKVISION DS-2DF7284-AW User Manual

User Manual of IR Network Speed Dome
Authentication (optional): If your email server requires authentication, check
this checkbox to use authentication to log in to this server and enter the login
user name and password.
Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be
configured.
Receiver: The name of the user to be notified.
Receiver's Address: The email address of user to be notified.
3. Click

6.4 Configuring Video and Audio Settings

6.4.1 Configuring Video Settings

Steps:
1. Enter the Video Settings interface:
Configuration >Basic Configuration > Video / Audio > Video
Or Configuration > Advanced Configuration > Video / Audio > Video
2. Select the Stream Type of the speed dome to main stream (normal), sub-stream
or third stream.
The main stream is usually for recording and live viewing with good bandwidth,
and the sub-stream can be used for live viewing when the bandwidth is limited.
Refer to the Section 6.1 Configuring Local Parameters for switching the main
stream and sub-stream for live viewing.
3. You can customize the following parameters for the selected main stream or
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to save the settings.
Figure 6-24 Configure Video Settings
58
www.cctvireland.ie