User Manual of IR Network Speed Dome
1) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
2) Check
interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion
Detection in Section 6.6.1 Configuring Motion Detection, or Step 4 Configuring
External Alarm Input in Section 6.6.1 Configuring Motion Detection.
3) Check the Enable Event-triggered Snapshot checkbox.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
checkbox in Motion Detection Settings or Alarm Input
Figure 7-9 Snapshot Settings
87
checkbox in FTP
www.cctvireland.ie