User Manual of IR Network Speed Dome
4. Click
Set the Arming Schedule for Motion Detection in Section 6.6.1 Configuring
Motion Detection.
5. Check the checkbox to select the linkage method taken for the alarm input. Refer
to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1
Configuring Motion Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative
checkbox and select the No. to enable Preset Calling, Patrol Calling or Pattern
Calling.
7. You can copy your settings to other alarm inputs.
8. Click
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-46 Alarm Input Settings
to set the arming schedule for the alarm input. Refer to Step 2
to save the settings.
77
www.cctvireland.ie