Setting / Calling A Patrol - HIKVISION DS-2DF7284-AW User Manual

User Manual of IR Network Speed Dome
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
39 IR cut filter in
40 IR cut filter out
41 Call pattern 1
42 Call pattern 2
43 Call pattern 3
44 Call pattern 4
92 Start to set limit stops
Note: You may need to use the OSD(On Screen Display) menu when controlling the
speed dome remotely. To display the OSD menu on the live view screen, you can call
the preset number 95.

4.5.3 Setting / Calling a Patrol

Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from
3. Click to enter the adding interface of preset as shown in Figure 4-8.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
96
97
98
99
100
101
102
103
104
105
Figure 4-7 Special Preset
to enter the patrol settings interface.
Stop a scan
Start random scan
Start frame scan
Start auto scan
Start tilt scan
Start panorama scan
Call patrol 5
Call patrol 6
Call patrol 7
Call patrol 8
.
27
www.cctvireland.ie