Configuring Video Loss Alarm - HIKVISION DS-2DF7284-AW User Manual

User Manual of IR Network Speed Dome
6.3.10 Configuring Email Settings to set the Email parameters.
 Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a
FTP server.
Note: You need a FTP server and set FTP parameters first. Refer to Section
6.3.8 Configuring FTP Settings for setting FTP parameters.
 Trigger Channel
Record a video when an event occurs.
Note: You have to set the recording schedule to realize this function. Please
refer to Section 7.2 Configuring Recording Schedule for settings the
recording schedule.
 Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note: To trigger an alarm output when an event occurs, please refer to
Section 6.6.5 Configuring Alarm Output to set the alarm output
parameters.

6.6.2 Configuring Video Loss Alarm

Steps:
1. Enter the Video Loss Setting interface:
Configuration > Advanced Configuration> Events > Video Loss
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-44 Video Loss
74
www.cctvireland.ie