Set Mode - Icom IC-M35 Instruction Manual

7

SET MODE

D Power save function
The power save functon reduces current dran by deactvat-
ng the recever crcut for preset ntervals.
• OFF : The power save functon s turned OFF.
• ON : The power save functon s turned ON. The power save
functon wll be actvated when no sgnal s receved, and no
operaton s performed for 5 sec.
Power save ON
(default)
D Squelch sensitivity
When ths functon s turned ON, rejecton of nose s m-
proved so that the audo s not easly affected by nose.
Squelch sensitivity
OFF (default)
20
"PS"
Push
Power save OFF
"SS"
Push
Squelch sensitivity
ON
D Low fix function
( Appears only when the optonal battery case s attached; not
avalable wth German verson dependng on the pre-settng.)
When ths functon s turned ON, the output power s fixed to
low except for Channel 16.
Push
Low fix function
OFF (default)
D Noise detection function "nd"
The nose detecton functon enables the transcever to de-
tect the ambent nose whle n the standby condton. If the
detectng nose and the receved sgnal are stronger than the
specfic level, the transcever ncreases the volume level au-
tomatcally to sut the envronment when recevng a sgnal.
When the squelch s open, the transcever won't detect nose.
• OFF : The nose detecton functon s turned OFF.
• Low : When the detectng nose s louder than the specfc level,
the transcever turns up the volume.
• Hgh : When the detectng nose s louder than the specfic level, the
transcever turns up the volume greater than "Low" settng.
Push
Noise detection function
OFF (default)
"LF"
Low fix function ON
Noise detection function
ON (High)