Intercom, line status, auto-answer, privacy or auto-line selection are inoperable.
Check if Lines
and 2 are cross wired in the wall jack.
If used, see if you may have installed your 2-line adapter incorrectly.
Be sure all extensions in the system are connected to [LINE I].
Check the assigned extension codes, making sure they are unique.
Be sure the length of cable between stations does not exceed 300 feet.
Check that all phone lines are correctly connected to each station (every [LINE I] is connected to
the appropriate line, every [LINE
Remove all RFI filters from the system wiring. You may also need to contact your local telephone
company to have any RFI filter removed from the company side of the connection.
No dial tone/phone will not dial out.
Can' t hear the ring signal.
Can' t hear the ring signal on one line only.
While on a call do you hear another call on the line or are you experiencing radio frequency
interference?
Reaching the wrong number in speed dialing.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com
44
Order #5125C
Need help?
Do you have a question about the IBM-4900 and is the answer not in the manual?