AutoDome Easy II
7.1.1
Tools/Supplies Required
–
–
–
–
–
–
7.1.2
Preparing the Ceiling for Installation
The following instructions detail the preparation necessary to
prepare the surface and the steps to install a pipe mount.
Certain steps contain additional information for outdoor
installations.
1.
Bosch Security Systems, Inc.
Appropriate straight slot screwdrivers
No. 2 Phillips screwdriver
Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
Ground Lug (outdoor use only)
T-10 Torx wrench
AutoDome Easy II Camera, required for an outdoor
installation
Determine a secure hard surface location for the ceiling
pipe mount (supplied separately).
88.8
(3.5)
88.8
(3.5)
3/4-14 NP
SM Threads
Ø11.2 (4x)
(0.44)
Figure 7.1 Pipe Mount Dimensions
Installation Manual
Installing a Pipe Mount | en
736.0
(28.98)
529.0
(20.83)
429.0
(16.89)
Ø153.0
F.01U.164.478 | 2.0 | 2010.02
51