Bosch VEZ Series Installation Manual page 59

AutoDome Easy II
8.
9.
Bosch Security Systems, Inc.
Attach the camera to the mounting plate by inserting the
vertical tab into the recessed slot on the top of the camera
dome to the right of the safety locking screw.
Figure 7.8 Safety locking screw location
Rotate the camera approximately 15 degrees to the right
and lock firmly into place, as shown in the next illustration.
Note: Do not loosen brass mounting buttons.
Figure 7.9 Attach Dome to Mounting Plate
Installation Manual
Installing a Pipe Mount | en
F.01U.164.478 | 2.0 | 2010.02
59