Bosch VEZ Series Installation Manual page 110

110 en | Pelco On-Screen Menus
NOTICE!
Use Zoom to select the Exit item from anywhere in a menu.
Menu
Exit
Command Lock
(locked)
Bosch Menu
(locked)
Camera Setup
PTZ Setup
Edit Password
(locked)
FastAddress
(locked)
Software Version
Ack and Reset
Alarms
Restore All
Settings
(locked)
Reset All Memory
(locked)
NOTICE!
After a period of 4.5 minutes of inactivity, the OSD menu times-
out and exits without warning. Some unsaved settings can be
lost!
F.01U.164.478 | 2.0 | 2010.02
Description
Exits the menu.
Allows or prohibits accessing locked commands. (If
password is set, you are prompted to enter the
password.
Accesses the full AutoDome Easy II configuration menu
and all AutoDome Easy II settings.
Accesses the White Balance and Night Mode camera
settings.
Accesses the tours, tour periods, scan speed, edit
presets, limit stops, recording, and AutoPivot settings.
Changes the password.
Sets or changes a camera address.
Displays the current software versions.
Acknowledges and resets active alarms.
Restores all settings to their original default setting.
Clears all settings, including scene shots, tours, and
recordings stored in the AutoDome Easy II memory.
Installation Manual
AutoDome Easy II
Bosch Security Systems, Inc.