Preparing The Surface Mount For An Outdoor Installation - Bosch VEZ Series Installation Manual

24 en | Installing a Surface Mount
4.1.3 Preparing the Surface Mount for an Outdoor
Installation
The following instructions detail the preparation necessary to
prepare the surface and the steps to install the Surface Mount
Junction Box for an outdoor application.
1.
2.
F.01U.164.478 | 2.0 | 2010.02
Determine a secure location for the surface mount and the
dome. The illustration below shows the placement of the
surface mount (item 1, below) and the dome (item 2).
ø
153.0
(6.02)
R50.6
(1.99)
Figure 4.4 Outdoor Surface Mount with AutoDome Easy II
Use the VEZ-A2-JC or VEZ-A2-JW Surface Mount Junction
Box as a template to mark the location of the four (4) M4
or #10 pan head screws (Item 1, below).
Figure 4.5 Location of M4 or #10 pan head screws
Installation Manual
AutoDome Easy II
175.0
(6.89)
Bosch Security Systems, Inc.