Power Connections To Outdoor Cameras - Bosch VEZ Series Installation Manual

AutoDome Easy II
NOTICE!
The camera unit accepts 24 VAC or 12 VDC, 1 A power only. Do
not connect 120 V or 230 V to this camera.
To connect the power to indoor models:
1.
2.
3.
4.
8.2.2

Power Connections to Outdoor Cameras

Figure 8.2 Power Cable
Ref. # Wire
1
2
3
NOTICE!
The camera unit accepts 24 VAC, 1 A power only. Do not
connect 120 V or 230 V to this camera.
To connect the power to outdoor models:
1.
2.
Bosch Security Systems, Inc.
Locate the cable assembly with a three (3) pin mating
connector on one end and the red and black flying leads on
the other end.
Connect one lead of the ground or 24 VAC power source to
the black wire.
Connect one lead of the 24 VAC or the 12 VDC power
source to the red wire.
Connect the green earth ground cable to a suitable
grounded conduit.
24 VAC
24 VAC
User supplied Power Supply
Locate the cable assembly with a three (3) pin mating
connector on one end and the red and black flying leads on
the other end.
Connect one lead of the 24 VAC power source to the black
wire.
Installation Manual
Preparing the Wiring | en
Color
Red
Black
n/a
F.01U.164.478 | 2.0 | 2010.02
63