Cisco 7941G Administration Manual page 29

Cisco Unified IP Phone Settings
Option
NAT Address
Call Statistics
Related Topics
Display Settings Menu, on page 2
Device Configuration Menu, on page 26
Line Settings Menu for SIP Phones
The Line Settings menu displays information that relates to the configurable parameters for the lines on your
SIP Phone. The following table describes the options in this menu.
Table 9: Line Settings Menu Options
Option
Name
Short Name
Longer
Authentication Name
Display Name
Proxy Address
Description
Displays the WAN IP address of the NAT
or firewall server. This value will always
be set to null.
This value is set to No by default.
Description
Displays the lines and the number used to
register each line.
Displays the short name configured for the line.
Displays the name used by the phone for
authentication if a registration is challenged by
the call control server during initialization.
The length of the SIP digest authentication
name is 128 characters for Cisco Unified 7900
Series SIP Phones. The authentication name is
used to verify that the phone is allowed to send
SIP messages (REGISTER, INVITE, and
SUBSCRIBE) to the Cisco Unified CM.
Displays the identification the phone; used for
display for caller identification purposes.
Displays the IP address of the proxy server used
by the phone. The value is left blank because
it is not applicable to SIP Phones that are using
Cisco Unified Communications Manager.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
SIP Configuration Menu for SIP Phones
To Change
Display only.Cannot configure.
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile.
To Change
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Display only—cannot configure.
Communications Manager 9.0 (SCCP and SIP)
29