Tftp Server 1 - Cisco 7941G Administration Manual

Cisco Unified IP Phone Settings
Option

TFTP Server 1

Description
Primary Trivial File Transfer Protocol
(TFTP) server used by the phone. If you
are not using DHCP in your network and
you want to change this server, you must
use the TFTP Server 1 option.
If you set the Alternate TFTP option to
Yes, you must enter a non-zero value for
the TFTP Server 1 option.
If neither the primary TFTP server nor
the backup TFTP server is listed in the
CTL file or ITL file on the phone, you
must unlock the files before you can save
changes to the TFTP Server 1 option. In
this case, the phone will delete the file
when you save changes to the TFTP
Server 1 option. A new CTL or ITL file
is downloaded from the new TFTP Server
1 address.
When the phone looks for its TFTP
server, it gives precedence to manually
assigned TFTP servers, regardless of the
protocol. If your configuration includes
both IPv6 and IPv4 TFTP servers, the
phone prioritizes the order that it looks
for its TFTP server by giving priority to
manually assigned IPv6 TFTP servers and
IPv4 TFTP servers. The phone looks for
its TFTP server in the following order
1 Any manually assigned IPv6 TFTP
servers
2 Any manually assigned IPv4 TFTP
servers
3 DHCPv6 assigned TFTP servers
4 DHCP assigned TFTP servers
For information about the CTL
Note
and ITL files, see Cisco Unified
Communications Manager
Security Guide. For information
about unlocking CTL and ITL
files, see
Files, on page
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
To Change
Set TFTP Server 1 Field, on page 21
Unlock CTL and ITL
52.
Communications Manager 9.0 (SCCP and SIP)
Network Configuration Menu
11