Cisco 7941G Administration Manual page 15

Cisco Unified IP Phone Settings
Option
IPv6 TFTP Server 1
(SCCP phones only)
Description
Primary IPv6 Trivial File Transfer Protocol
(TFTP) server used by the phone. If you
are not using DHCPv6 in your network and
you want to change this server, you must
use the IPv6 TFTP Server 1 option.
If you set the IPv6 Alternate TFTP option
to Yes or you disable DHCPv6, you must
enter a non-zero value for the IPv6 TFTP
Server 1 option.
If you make changes to the Alternate TFTP
or IPv6 TFTP servers, you must first
unlock the CTL file or ITL file on the
phone.
When the phone looks for its TFTP server,
it gives precedence to manually assigned
TFTP servers, regardless of the protocol.
If your configuration includes both IPv6
and IPv4 TFTP servers, the phone
prioritizes the order that it looks for its
TFTP server by giving priority to manually
assigned IPv6 TFTP servers and IPv4
TFTP servers. The phone looks for its
TFTP server in the following order:
1 Manually assigned IPv6 TFTP Servers
2 Manually assigned IPv4 TFTP Servers
3 DHCPv6 assigned TFTP Servers
4 DHCP assigned TFTP Servers
For information about the CTL or ITL file,
see Cisco Unified Communications
Manager Security Guide. For information
about unlocking the CTL file, see
CTL and ITL Files, on page
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Network Configuration Menu
To Change
Set IPv6 TFTP Server 1 Field, on
page 24
Unlock
52.
Communications Manager 9.0 (SCCP and SIP)
15