Switching The Sound Adjustment Mode; Parametric Equalizer Adjustment (Peq); Setting Preset Eq; Adjusting The Median Frequency And The Q Curve - Eclipse CD3200 Handy Reference Manual

Switching the sound adjustment
mode
II
Press the
~/MENU]
button for
more than one second.
The Menu selection mode is activated.
II
Press the [SELECT] (Up/Down)
button to select SOUND.
II
Press the [ENTER] button.
The sound selection mode is
activated.
II
Press the [SELECT] (Up/Down)
A
button to select a setting item.
Each time the button is pressed, the
setting item changes.
PEa
B
Position Sel
B
X-Over
B
Non-
F Phase
B
PEa ...
EI
Press the [ENTER] button.
The adjustment mode is switched.
Parametric equalizer adjustment
(PEQ)
II
Press the [SELECT] (Up/Down)
button to select PEQ.
I
Press the [ENTER] button.
The PEO setting mode is activated.
How to operate the Sound Adjustment Mode
Setting preset EQ
II
Press a button from [2] to [6] while
the PEQ setting mode is activated.
Pressing the button allows you to
toggle through preset EO modes as
follows:
Button Mode Patterns
[2] DEFEAT No EO adjustments
[3] POWER The pattern that
emphasize the bass
range.
[4]
SHARP The pattern that
emphasize the treble
range.
[5] VOCAL The pattern that
emphasize the middle
range.
[6] CUSTOM Custom pattern
rnATTENTION
Custom Ea will be overwritten if the value for
BASS, MIDDLE and TREBLE are adjusted in •
the audio control mode. (For details, Refer to
"How to operate the AUDIO CONTROL" on
page 64.)
Adjusting the median frequency and
the Q curve
Frequency level and a curve for 3 bands (BASS,
MIDDLE and TREBLE) can be adjusted
separately. a curve pattern can be chosen from
Narrow, Normal, MidWide or Wide for BASS,
Narrow or Normal for MIDDLE, and Normal for
TREBLE.
II
Press the [ENTER] button to select
the band to be adjusted.
Each time the button is pressed, the
band changes in the following order.
BASS ---+MIDDLE ---+TREBLE ---+...
69