Preset Channel Scan; Switching Displays When Using The Xm Satellite Radio; Displaying The Xm 10 - Eclipse CD3200 Handy Reference Manual

About the optional unit
Preset channel scan
This function enables the reception of all the
channels in the preset buttons for five seconds
each.
II
Press the [SELECT] (Down) button
for more than one second.
[P SCAN] will appear on the display,
and channels set in preset buttons [1]
through [6] will be received for five
seconds each.
a
To stop the preset scan mode at
the desired channel, press the
[SELECT] (Down) button again.
The main unit will stay tuned to the
desired channel.
Switching displays when using
the XM satellite radio
II
Press the [SCREENITEXT] button
for more than one second.
Each time the button is pressed the
display item changes in the following
order:
channel name
~
category name
~
title ~ name ~ channel name ~ ...
~ATTENTION
If there are no names, the "NO DATA"
message will appear.
90
Displaying the XM 10
Displays the XM 10. The XM 10 is necessary
when subscribing to programs, etc.
II
Press the
~/MENU]
button for
more than one second.
The Menu selection mode is activated.
a
Press the [SELECT] (Up/Down)
button to select FUNC, and then
press the [ENTER] button.
II
Press the [SELECT] (Up/Down)
button to select XM ID.
II
Press the [ENTER] button.
The XM ID is displayed.