Automatically Storing Stations Into Memory. (The Automatic Preset Mode: Asm); Manually Storing Stations Into Memory; Preset Station Scan - Eclipse CD3200 Handy Reference Manual

Automatically storing stations
into memory. (The automatic
preset mode: ASM)
1
Press the [SELECT] (Up) button for
more than two seconds, until you
hear a beep.
The automatic preset mode starts.
"ASM ON"
will
appear on the display,
and stations are automatically entered
in memory under buttons [1] to [6].
These buttons are called preset
buttons.
rnATTENTION
• Pressing the preset buttons ([1] to [6])
allows you to make one-touch station
selections. The frequency of the selected
station is indicated on.
• When a new station is set in memory, the
station previously set in memory will be
deleted.
• If there are fewer than six receivable
stations, the stations set in the remaining
buttons will be retained.
~CAUTION '~
If the vehicle's battery is disconnected (for
repairs to the vehicle or for removing the
main unit), all stations in memory will be
lost. In such a case, store stations in the
memory again.
How to operate the tuner
Manually storing stations into
memory
Store a station to a preset button.
I
Press the [SELECT] (Right/Left)
button to tune to the station that
you want to store in memory.
II
Select any button, from [1] to [6],
and press it for more than two
seconds.
The selected station is now stored in
a preset button.
Repeat the above procedure to store •
additional stations one at a time in
buttons [1] to [6], and store them in
memory.
~CAUTION
If the vehicle's battery is disconnected (for
repairs to the vehicle or for removing the
main unit), all stations in memory will be
lost. In such a case, store stations in
memory again.
Preset station scan
This function enables reception of all the stations
in the preset buttons for five seconds each.
II
Press the [SELECT] (Down) button
for more than one second.
"P SCAN" will appear on the display,
and stations stored under preset
buttons [1] through [6] will be played
for five seconds each.
II When your desired station is
displayed, press the [SELECT]
(Down) button again.
The main unit will stay tuned to the
desired station.
43