Position Selector; Crossover Adjustment (X-Over) - Eclipse CD3200 Handy Reference Manual

Various Settings
2
Press the [SELECT] (Up/Down)
button to adjust the
Q
curve
pattern.
Each time the button is pressed, the
Q
curve pattern changes in the following
order.
When BASS is selected:
WIDE ~ MidWIDE ~ NORMAL ~
NARROW
~
WIDE
~
...
When MIDDLE is selected:
NORMAL
~
NARROW
~
NORMAL
~
When TREBLE is selected:
NORMAL (Fixed)
I!I
Press the [SELECT] (Right/Left)
iii
button to adjust the frequency.
Each time the button is pressed, the
frequency changes in the following
order.
When BASS is selected:
60Hz
~
80Hz
~
1OOHz
~
120Hz
~
60Hz~
...
When MIDDLE is selected:
700Hz (fixed)
When TREBLE is selected:
7.5kHz
~
10kHz
~
12.5kHz
~
15kHz
~ 7.5kHz~
...
rnATTENTION
• The median frequency and the Q curve you
set are used for BASS, MIDDLE and
TREBLE in the audio control mode. (For
details, Refer to "How to operate the AUDIO
CONTROL" on page 64.)
• When the median frequency and the Q
curve are adjusted, CUSTOM EQ is also
updated.
70
Position selector
The sound field can be adjusted for the listener's
seat position.
II
Press the [SELECT] (Up/Down)
button to select Position Sel.
EI
Press the [ENTER] button.
The position selector setting mode is
activated.
I
Press the [ENTER] or [SELECT]
(Up/Down/Right/Left) button to
select the position you want.
When each button is pressed
I
the
position is changed as follows.
ENTER:
OFF
Up:
FRONT
Down:
REAR
Right:
FRONT-RIGHT
Left:
FRONT-LEFT
Crossover adjustment (X-Over)
Specified frequency bands are allocated to each
speaker for improved sound integration.
II
Press the [SELECT] (Up/Down)
button to select the X-Over.
EI
Press the [ENTER] button.
The crossover setting mode is
activated.