Switching The Sound Adjustment Mode; Circle Surround Ii (Csii) Setting; Parametric Equalizer Adjustment (Peq) - Eclipse CD7200 MKII Owner's Manual

Switching the sound adjustment
mode
Press the [ /MENU] button for
1
more than one second.
The Menu selection mode is activated.
Press the [SELECT] (Up/Down)
2
button to select SOUND.
3
Press the [ENTER] button.
The sound
activated.
Press the [SELECT] (Up/Down)
4
button to select a setting item.
Each time the button is pressed, the
setting item changes.
The following setting items can be
switched based on the speaker layout
settings (refer to page 77):
When 4–speaker layout is selected:
CS II ↔ PEQ ↔ Time Align ↔
X-Over ↔ Harmonizer ↔ NF Setting ↔
Sound Data ↔ SP Layout ↔ Custom
Mode ↔ CSII
When 3 way speaker layout is
selected:
PEQ ↔ Time Align ↔ X-Over ↔
Harmonizer ↔ NF Setting ↔ Sound
Data ↔ SP Layout ↔ Custom Mode ↔
PEQ ↔
5
Press the [ENTER] button.
The adjustment mode is switched.
selection mode
How to operate the Sound Adjustment Mode

Circle Surround II (CSII) setting

CSII and TruBass (ON/OFF) settings can be
performed.
Press the [SELECT] (Up/Down)
1
button to select CSII.
2
Press the [ENTER] button.
The CSII setting mode is activated.
3
Press [SELECT] (Up/Down) button.
is
Press the [SELECT] (Up/Down) button
to set CSII modes as follows:
LOW ↔ Hi ↔ OFF ↔ LOW
Press the [SELECT] (Right/Left)
4
button.
When CSII is HI or LOW, TruBass can
be set to ON or OFF.
Right:
Sets TruBass ON.
Left:
Sets TruBass OFF.
The TruBass display appears shaded
when TruBass is set to OFF.
The selected settings will take effect.
Parametric equalizer adjustment
(PEQ)
When the 4-speaker layout is selected, 7-band
parametric equalizers can be adjusted.
When the 3 way speaker layout is selected, 11-
band parametric equalizers can be adjusted for
the Hi range, Mid range and Low range.
(For details on speaker layout setting, refer to
"Speaker layout settings (SP Layout)" on page
77.)
Each band can be set to the following median
frequencies:
XII
71