Eclipse - fujitsu ten cd/ms receiver with mp3/atrac3 decoder and remote owner's manual (152 pages)
Summary of Contents for Eclipse E-iSERV VCD3200
Page 1
E-iSERV Operation Guide CD/USB Multi-Source Receiver with Bluetooth wireless technology We appreciate your purchase of this CD receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
Page 2
Motion Picture customization Importing display data Motion Picture Customize Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV (website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the Owner’s Manual.
Page 3
Load the downloaded data from the USB memory or CD-R to the unit. For details of the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.
Steering Remote Control Importing steering remote data (U.S.A. only) Steering Remote Control The vehicle’s factory loaded steering remote becomes inoperable when the CD3200 is installed. The ECLIPSE website (E-iSERV) provides software that enables steering remote operation even with the installation of the main unit. Import this software into your CD3200. How to operate the Steering Remote Control Download the file for Steering Remote setting from the E-iSERV website, then write it to USB memory or CD-R.
Page 5
Load the downloaded data from the USB memory or CD-R to the unit. For details of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's Manual. ATTENTION • This function is available only for the vehicles that have steering remote with the voltage detection type interface.
Need help?
Do you have a question about the E-iSERV VCD3200 and is the answer not in the manual?
Questions and answers