Loud Ringer Connected To The Meari - Avaya 3900 Series User Manual

Figure 12: MEARI output connectors
Install the MEARI
Install the MEARI
1. The RJ12 modular connector provides access to all three output signals and is
2. The center round connector is a 3.5 mm audio jack that provides the record audio
3. The smaller round connector is a 2.5 mm jack that provides the call status relay

Loud ringer connected to the MEARI

Figure 13: Loud ringer connected to the MEARI through the RJ12 jack
the loud ringer.
Avaya 3900 Series Digital Deskphones User Guide
on page 85 describes how to install the MEARI.
intended for wiring connection to remotely located equipment (not on the desktop).
Table 19: RJ12 connections
Wiring connected to the MEARI must not go outside a building for safety purposes.
Table 19: RJ12 connections
Position
3, 4 center pair
2, 5 2nd pair
1, 6 3rd pair
signal between tip and sleeve at a reduced level for connection to the microphone
input of a desktop voice recorder.
contacts between tip and sleeve for activation of a desktop voice recorder or
connection to a call in progress indicator lamp.
on page 85 shows the connections.
Wire color
Green, Red
Black, Yellow
White, Blue
Loud ringer connected to the MEARI
Function
Call status relay contact.
Record audio (line level).
Ring relay contact
on page 86 shows
August 2010 85