Analog Terminal Adapter (Ata) - Avaya 3900 Series User Manual

Installation
Note:
FDHF is compatible with the MEARI; however, you cannot use FDHF when a recording
device is connected.

Analog Terminal Adapter (ATA)

Install the ATA
Series Digital Deskphone.
The ATA allows an off-the-shelf analog device (FAX, modem, or analog telephone (500/2500))
to work simultaneously with your Avaya 3902, 3903, 3904, or 3905 Digital Deskphone. The
Avaya 3901 Digital Deskphone does not support the ATA.
Install the ACM into your Avaya 3900 Series Digital Deskphone (see
page 82), before you install your ATA. The ACM provides connection capabilities between
the Avaya 3902, 3903, 3904, and 3905 telephones and the ATA.
Install the ATA
1. Insert the ATA accessory cartridge into the ACM. The latch should be at the top.
2. Connect the commercial device you have selected to use, either your FAX machine,
3. Plug the transformer into the electrical outlet (use only the transformer designed for
4. Connect the Adapter plug, attached to your transformer, into the wall jack.
5. Connect the six-conductor line cord from the telephone to the Adapter jack attached
6. Refer to the manufacturer's documentation for complete installation and
Figure 11: ATA connections
82 Avaya 3900 Series Digital Deskphones User Guide
on page 82 describes how to install and use the ATA with your Avaya 3900
modem, or analog (500/2500) telephone, to the connection on your ATA cartridge
interface.
your ACM accessories).
The wall transformer for Avaya 3900 Series accessories is NTMN80AA (CPC
A0779713) 110V Wall Transformer (Avaya 3900 series). It attaches between the
telephone line cord and the telephone walljack.
to your ACM accessory transformer.
configuration instructions for your external analog device (FAX machine, modem,
or 500/2500 telephone).
on page 83 shows the connections for the ATA.
ATA KBA PC
Utility
MEARI DBA FDHF
Install the ATA on
August 2010