L800/L801
1.5.16 APG Sensor Assy
Removal procedure
1.
Disengage the two hooks and remove the APG Sensor Assy.
APG Sensor Assy
Figure 1-107. Removing the APG Sensor
Disassembly/Reassembly
1.5.17 Front Paper Guide Assy
Do not touch the surface of the rubber roller of the EJ Roller Assy
C A U T I O N
and the coated part of the PF Roller Assy as it can adversely affect
:Hook
the print quality.
Removal procedure
1.
Remove the screw and remove the Parallelism Bushing L.
Screw
[Rear Side]
Positioning Hole and Guide Pin
APG Sensor Assy
: C.B.S.(P2) M3x8 (tightening torque: 6-8 kgf.cm)
Figure 1-108. Removing the Parallelism Bushing L
Revision A
Parallelism Bushing L
Front Paper Guide Assy
57
Confidential