L800/L801
1.3 Removing Exterior Parts/Components
1.3.1 Printer Cover
Removal procedure
1.
Pull out the left shaft and right shaft of the Printer Cover, and remove the
Printer Cover.
Printer Cover
Shaft (left)
Figure 1-15. Removing the Printer Cover
Disassembly/Reassembly
1.3.2 Paper Support Assy
Removal procedure
1.
2.
Paper Support Assy
Shaft (right)
Printer Cover
Open the Paper Support Assy.
Disengage the right shaft of the Paper Support Assy from the bushing of the
ASF Unit by pushing the bushing outward. Then remove the Paper Support
Assy, disengaging the left shaft preventing the Edge Guide projection from
hitting against the other parts.
Push
Bushing of the ASF
Figure 1-16. Removing the Paper Support Assy
When reinstalling the Paper Support Assy, match the projection
and hole of the Edge Guide, then attach the right shaft and the left
shaft in that order. (Put the shafts at the front side in the bushing
and then push them rearward.) After reinstalling, check that the
Paper Support Assy moves smoothly.
Convex Portion
2
Mounting Direction
(from front side to rear side)
Figure 1-17. Reinstalling the Paper Support Assy
Revision A
Edge Guide
Projection
:Shaft
Paper Support Assy
1
Hole
: Shaft
24
Confidential