L800/L801
1.5.18 CDR Tray Sensor
Removal procedure
Always follow the steps below to remove the CDR Tray Sensor, or
C A U T I O N
one of its hooks can be broken.
1.
Disengage the hook of the CDR Tray Sensor.
2.
Turn the CDR Tray Sensor 90 degrees in the direction of the arrow to
disengage its another hook, and pull it out from the hole to remove it together
with the CDR Guide Sensor.
CDR Tray Sensor
90-degrees Turn
Figure 1-115. Removing the CDR Tray Sensor
Disassembly/Reassembly
Hook
CDR Tray Sensor
Revision A
60
Confidential