L800/L801
Microweave Pattern
+3
+2
+1
Figure 2-3. Head Angular Adjustment (Microweave) Pattern
How to Judge
Examine the printout +3 to -3 patterns and select the value for the group of
which the gaps between the 2 color bars are the smallest.
Additional information
If no appropriate pattern is found, reassemble/replace the Printhead.
Example for judgement
C H E C K
P O I N T
OK
Adjustment
0
-1
-2
-3
Gap
NG
Using the Adjustment Program
2.2.3 Bi-D Adjustment
The pattern shown below is printed for each of the 7 print modes.
20
22
24
Figure 2-4. Bi-D Adjustment Pattern
How to Judge
Find the pattern with no gaps or overleaps of the left and right pattern, and
enter the value of that pattern.
Additional information
If an appropriate pattern is not printed, enter the nearest value and then print the
patterns again.
Example for judgement
C H E C K
P O I N T
Overlap
NG
Revision A
25
26
28
30
27
Gap
OK
NG
Confidential
32
78