Epson L800 Service Manual page 33

Color inkjet printer
Hide thumbs Also See for L800:
Table of Contents

Advertisement

L800/L801
Panel Board / Buttons Removal
1.
Remove the Panel Assy.
(p.30)
2.
Remove the two screws on the back of the Panel Assy, and remove the Panel
Cover.
Screw
: C.B.P. M3x10 (tightening torque: 3-5 kgf.cm)
3.
Remove the screw on the front of the Panel Unit, and remove the Panel Unit
from the Open Sensor Holder by sliding it in the upper right direction.
Screw
: C.B.P. M3x10 (tightening torque: 3-5 kgf.cm)
[Front side]
Panel Cover
Panel Unit
Figure 1-34. Removing the Panel Board / Buttons (1)
4.
Disconnect the connector (CN1) on the Panel Board, peel the Panel FFC off
the back of the Panel Shield Plate, and remove the Panel FFC.
5.
Remove the two screws and remove the Panel Shield Plate from the Panel
Unit.
Screw
: C.B.P. M3x10 (tightening torque: 3-5 kgf.cm)
[Front side]
Panel Unit
CN1
Panel FFC
Figure 1-35. Removing the Panel Board / Buttons (2)
Disassembly/Reassembly
[Back Side]
Hook of the Panel
Shield Plate
Open Sensor Holder
Panel Shield Plate
[Back Side]
Reference Line
Double-sided Tape
Panel Assy/ Cover Open Sensor
6.
Disengage the hook on the back of the Panel Board and remove the Panel
Board.
[Back Side]
Hook
Figure 1-36. Removing the Panel Board / Buttons (3)
7.
Release the three hooks and remove the PS button, the Ink button, and the
Paper button from the Housing Panel B.
8.
Slide the Lens of the PS button, the Ink button, and the Paper button in the
direction of the arrow to remove it.
Housing Panel B
[Front side]
PS Button
Ink Button
Lens
Paper Button
Figure 1-37. Removing the Panel Board / Buttons (4)
Revision A
Positioning Hole
and Guide Pin
Panel Board
[Back Side]
Housing Panel B
Hook
Step 8
Lens
Confidential
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L801

Table of Contents