Making A Special Tool For Holder Contact - Epson L800 Service Manual

L800/L801
Points to be checked before packing the printer
The Valve Lever is on the position
shown below (the Choke Valve is
closed). (See Figure 1-3.)
Valve Lever
The hooks (x2) of the Ink Supply
Tank Assy are securely engaged
with the Housing Upper Assy.
Ink Supply
Tank Assy
Housing Upper Assy
Disassembly/Reassembly
All the caps of the Ink Supply Tank
Assy are securely closed.
Cap
The opened ink bottle is not
included in the box.
Overview

1.1.4 Making a Special Tool for Holder Contact

The Holder Contact (refer to
p.38
tool. The method for making the tool is described below.
1. Prepare a handle part of a clip, or a similar metal wire piece.
Clip
Figure 1-10. Making Special Tool for Holder Contact (1)
2. Bend the metal wire as shown below.
25mm
50mm
Figure 1-11. Making Special Tool for Holder Contact (2)
) can be easily removed by using a special
Handle part
7mm
Special Tool
Confidential
Revision A
15