Table of Contents
Advertisement
109
Protocol Class Assignment...
Selecting this item will open the Protocol Class Assignment screen.
Port Filtering Attributes...
Selecting this item will open the Port Filtering Attributes screen.
Protocol Class Assignment Screen
The Protocol Class Assignment screen shows the 15 protocol classes that may be
defined by the user. Note that Class 0 is the default class and will contain all DSAPs
and Ethertypes not assigned to any other class.
You modify a class by highlighting the class and pressing
. You will then be
ENTER
prompted for the field to modify: Name , Ethertype or DSAPs . When all classes
have been defined as desired, select Return to save the values and exit the screen.
To open this screen, do the following:
→
1. From the main menu, select Configuration
Filters & Port Security. Then
select Protocol Filters...
2. On the Protocols Filters screen, select Protocol Class Assignment...
Class
For the selected port, use the Class field to select a class to modify.
Ethertype
The Ethernet protocol type that you want to filter. You can specify one Ethertype
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Switch Configuration
Advertisement
Table of Contents
