Table of Contents
Advertisement
Frame Conversion Configuration
This section describes how to configure frame conversion on a Fast Ethernet port.
Frame Conversion Configuration Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast
Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.
3. On the Port Configuration screen, select Virtual Port Configuration ...
4. On the Virtual Port Configuration screen, select Frame Conversion
Configuration... . The Frame Conversion Configuration screen appears.
IP Conversion Status
Information only. Shows the current status of the IP Conversion.
Possible values are Enabled and Disabled .
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
→
Port Configuration.
Switch Configuration
81
Advertisement
Table of Contents
