Table of Contents
Advertisement
SNA Conversion Configuration Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast
Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.
3. On the Port Configuration screen, select Virtual Port Configuration ...
4. On the Virtual Port Configuration screen, select Frame Conversion
Configuration... . The Frame Conversion Configuration screen appears.
Select SNA Conversion Parameters Change ...
SNA Frames Conversion
Sets the state of the SNA frames Conversion. Possible values are Enabled and
Disabled . If the state is set to Disabled , SNA traffic will be dropped.
Default: Enabled .
SNA: Token-Ring Format
Sets the format of SNA frames on Token-Ring. Available formats:
•
802.5
SNA: Ethernet Format
Sets the format of SNA frames on Ethernet. Available formats:
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Frame in the IEEE 802.5 format.
→
Port Configuration.
Switch Configuration
89
Advertisement
Table of Contents
