Operation Mode
This parameter displays the mode of the Fast Ethernet port. The value can be one
of the following:
•
Auto FDX 10
•
Auto FDX 100 The port is running in full duplex 100Mbps
•
Auto HDX 10
•
Auto HDX 100 The port is running in half duplex 100Mbps
•
state-unknown The port is disabled or the link is off
Address Demand Aging Level
Sets the threshold on the number of entries in the address table on which entries are
aged faster. Possible values are 50 , 60 , 70 , 80 and 90 percent and Disabled .
Default: 90 percent .
Trace Mask
Sets a bit mask for which messages are logged in the message log. This is mainly
for debugging purposes by Olicom support.
Virtual Port Configuration
Opens the Virtual Port Configuration screen, see page 78.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
The port is running in full duplex 10Mbps
The port is running in half duplex 10Mbps
77
Switch Configuration