153
Ring Open Status
This field indicates the success, or the reason for failure, of the station's most recent
attempt to enter the ring. Possible values are: No Open , Lobe Failed , Signal Loss ,
Insertion Timeout , Ring Failed , Beaconing , Duplicate MAC Address , Request
Failed , Remove Received , Open .
Ring Speed Next Open
Indicates the ring speed that will be attempted at the next open. Possible values are:
Unknown , 4 Mbps , 16 Mbps . Unknown can indicate that the port will attempt to
auto insert into the ring.
Upstream Neighbor
The MAC address of the upstream neighbor station in the ring.
Active Monitor Participate
If this field has a value of Enabled , then this port will participate in the active
monitor selection process. If the value is Disabled then it will not.
Functional Address
The bit mask of all Token-Ring functional addresses for which this port will accept
frames.
Last Beacon Sent
The elapsed time since a beacon frame was last sent on this port.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Monitoring the Network from the Statistics Menu