Routing Protocol (Rip) - Olicom ADSL Router A400A User Manual

Routing Protocol (RIP)

RIP sends routing-update messages at regular intervals and when the
network topology changes. When a router receives a routing update that
includes changes to an entry, it updates its routing table to reflect the
new route. RIP routers maintain only the best route (the route with the
lowest metric value) to a destination.
Static Route
1. Network: Specify the destination host.
2. Netmask: Specify a subnet mask value to be associated with
this route entry.
The subnet mask specifies which bits of the 32-bit binary IP address
represent network information. Most sites should use 255.255.255.0
for their subnet mask.
3. Gateway: Use the Gateway Address field to specify the IP
address of the default IP gateway.
4. Click Add button to save information. The configuration page
adds a new row to show this setting.
button to delete a chosen setting. Or you can click Replace
button to replace original setting.
5. Click the OK button to store your modified configuration in
this ADSL router memory. Or click Cancel button to return to
main page.
You can set up static route table for some fixed
domain address path.
33
You can click Delete