78
Virtual Port Configuration
This section describes virtual port configuration for the Fast Ethernet ports.
Virtual Port Configuration Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
2. You will be prompted for a port number. Select a Fast Ethernet port, that is, 21,
22, 25, or 26. If the Fast Ethernet port has more than one virtual port, a list of
the corresponding CRFs appears, from which the virtual port must be selected.
The Port Configuration screen appears.
3. On the Port Configuration screen, select Virtual Port Configuration ...
The following menu options are available:
Enabled
Sets the administrative state of the virtual port, possible values are Yes and No.
Default: Yes .
Status
Display only. Shows the current status of the virtual port.
•
Admin down
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
The port or virtual port is disabled.
→
Port Configuration.
Switch Configuration